User Manual

Page 1
Overview the Product
Introduction
NetPassage NP25G is a high-performance and low-cost IEEE802.11b/g
Router using the latest AR5007 technology. Using Atheros System-on-
Chip (SoC) solution, NP25G supports high-speed data transmission of
up to 54Mbps.
NetPassage NP25G combines 3 devices into one box. It works as a
Wireless Access Point, which allows you to connect Wireless B/G
devices to the network. It also has a 4-port full-duplex 10/100Mbps
switch which connects your wired Ethernet devices directly to 4 PCs or
to additional hubs and switches to create a larger network. NP25G also
works as a router that lets your whole network share a high-speed
cable or DSL Internet connection.
To ease the complexity of setting up a secured network, NetPassage
NP25G features Wireless One-Touch Registration using WSC (Wireless
Simple Config).
There no need to setup or remember the secure key as require by other
wireless devices. The client automatically connect to NP25G with the
using the WPA-PSK secured wireless connection.
A network administrator or home users just need to push a single
access button on NP25G to allow it to enter the network.
The Client devices on running the JumpStart application automatically
discover NP25G and automatically register the connection with NP25G.
On completing the registration process, the client will create a wireless
secured connection profile. Each time the client makes a connection
with NP25G it automatically use this secured profile.