User Manual

Page 46
Configure the Advanced WLAN
Settings
Follow these steps to change the radio settings of the router.
1. Click on WLAN Setup from the
CONFIGURATION menu.
2
Select
Advanced
1. Set the Beacon Interval (the time
lapse between every beacon sent)
to any value between 20 and 1000.
It is preset as 100 seconds.
2. Set the Data Beacon Rate from 1 to
16384.
This determines how often the beacon
should contain a Delivery Traffic
Indication Message (DTIM) that tells
power-save clients that a packet is
waiting for them. Is it preset to 1.
3. Set the RTS/CTS Threshold from 256 to
2346.
It is preset to 2346.
4. Set the Frag Threshold from 256 to
2346.
It is preset to 2346.
5. Transmission Power Control (TPC)
offers the flexibility to set the Transmit
Power. (802.11h compliant)
It is set to Maximum by default, but
should be reduced if there is more than
one unit using the same channel
frequency.
1. Click Apply.
Changes will be enabled after reboot.
1
2
3