User Manual

Page 85
Configure Bandwidth Control for LAN
Bandwidth Control allows you to decide the available bandwidth in
levels of 1kbit.
Follow these steps to setup Bandwidth Control for LAN.
Click Bandwidth Control from the
CONFIGURATION menu.
Select whether to Enable or Disable
Bandwidth Control and click Apply.
Click Add to add a Bandwidth
Control Entry
1. Enter the Bandwidth Control Rule Name.
2. Enter the Committed Rate in kbit. This
sets the bandwidth committed.
3. Enter the Ceil Rate in kbit. This is the
ceiling rate which sets the maximum
bandwidth allowed.
4. Enter the Rule Type
Rule Types:
• Download by IP Address
• Download by MAC Address
• Upload by IP Address
• Upload by MAC Address
5. Enter the IP or MAC Address according
to the Rule Type selected.
6. Click Add to add this Bandwidth Control
Entry or click Cancel to cancel to
di d t
1
2
3
3