User's Manual

ManualsBrandsCompex Systems ManualsElectronicsWLE250NX

Full-size PCIe MINI CARD

WLE250NX

WIRELESS-ABGN 2X2 NETWORK MINI PCIE ADAPTER

Features

• Atheros XB116 reference design

• Maximum 20dBm output power(per chain)/ 25dBm(aggregate)

•

Single 3.3V power

• IEEE 802.11n compliant and backward compatible with 802.11a/b/g

• Dual-band 2 x 2 MIMO spatial multiplexing technique

• Supports up to 450Mbps physical data rates

•

Atheros XSPAN family chipset with SST3™, which increase the link rate by ~100% at short

range, ~50% at mid range and ~25% at long range

•

Supports Spatial Multiplexing, cyclic-delay diversity (CDD), low-density parity check (LDPC),

maximum ratio combining (MRC), space time block code (STBC) and Tx beamforming (TxBF)

•

Dynamic Frequency Selection (DFS)

•

Multi-Country Roaming Supported (IEEE802.11d Global Harmonization Standard)

• 2 x U.FL Antenna Connector

• Supports 802.11x authentication, 64/128/152Bit WEP, IEEE802.11i encryption

• Supports Windows 7, Windows Vista, Windows XP operating system

Summary of content (5 pages)

PAGE 1
Full-size PCIe MINI CARD WLE250NX WIRELESS-ABGN 2X2 NETWORK MINI PCIE ADAPTER Features • Atheros XB116 reference design • Maximum 20dBm output power(per chain)/ 25dBm(aggregate) • Single 3.3V power • IEEE 802.11n compliant and backward compatible with 802.
PAGE 2
Technical Specifications Chipset AR9582/AR9592 Host Interface PCI-Express 1.1 Standard Operating 3.3 VDC Voltage Power 3.5W Consumption Antenna 2 x U.FL Antenna Connector Connector IEEE 802.11a : 54Mbps48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps IEEE 802.11b : 11Mbps5.5Mbps 2Mbps 1Mbps 54Mbps48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps IEEE 802.11g : Fallback to 5.5Mbps, 2Mbps, 1Mbps IEEE 802.11n : 40MHz Humidity Dimensions automatically 1Nss: 135Mbps @ 800GI, 150Mbps @ 400GI (Max.
PAGE 3
Compliance Information FCC Compliance Statement: This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID.
PAGE 4
DIMENSIONS DRAWING Compex Systems Pte Ltd 135 Joo Seng Road, PM Industrial Building #08-01, Singapore 368363 Tel: (65) 6286 2086 Fax: (65) 6280-9947 Email: sales@compex.com.sg Compex (Suzhou) Co Ltd NO.12, ChuangTou Industrial Square, LouFeng North, Suzhou Industrial Park, Suzhou, Jiangsu Province, China 215122 Tel: (86)-512-62950050 Fax: (86)-512-62950026 Copyright © 2010 Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of COMPEX Inc.
PAGE 5
(1) The modules FCC ID is not visible when installed in the host, or (2) If the host is marketed so that end users do not have straight forward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module: Contains Transmitter Module FCC ID: TK4WLE250NX or Contains FCC ID: TK4WLE250NX must be used.