User's Manual

OEM integration instructions
This device is intended only for OEM integrators under the following conditions
The module is only limited to installation in mobile applications. The antenna must be installed such that 20 cm is
maintained between the antenna and usersand the transmitter module may not be co-located with any other transmit or
antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this
module.
As long as 3 conditions above are metfurther transmitter test will not be required.
Howeverthe OEM integrator is still responsible for testing their end-product for any additional compliance requirement with
this module installed (for exampledigital device emissionPC peripheral requirementsetc.)
OEM integration instructions
In the event that these conditions cannot be met (for example certain laptop configuration or co-location with another
transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid
and the FCC ID of the module cannot be used on the final product. In these and circumstancethe OEM integrator will be
responsible for re-evaluating. The end product (including the transmitter) and obtaining a separate FCC authorization
End product labeling
This transmitter module is authorization only for use in device where the antenna may be installed such that cm may be
maintained between the antenna and users. The final end product must be labeled in a visible area with the following
“Contains Transmitter Module FCC ID: TK4WLE600VX or Contains FCC ID: TK4WLE600VX
Information that must be placed in the end user manual
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF
module in the user’s manual of the end product which integrates this module. The end user manual shall include all required
regulatory information/warning as show in this manual.
Compex (Suzhou) Co Ltd
No.12 ChuangTou Industrial Square
LouFeng North, Suzhou Industrial Park
Suzhou, Jiangsu Province China 215122
Tel: +86
512 62950050
Fax: +86 512 62950026
20