User's Manual

Ethernet
2 FE ports with Auto-MDI/X
Extras
Serial Port
2
, JTAG
3
, Reset Button, Surge Arrestor, Watchdog Timer
Power Solutions
High voltage
DC Jack Input:12-24V, Passive PoE: 36-48V, IEEE 802.3af PoE
Low voltage
DC Jack Input: 12-24V, Passive PoE: 12-24V
PoE Injector Compatibility
IEEE 802.3af/at injectors(both end span and mid span)
Passive injectors
Power consumption (board only)
4W
ROHS Compliance
Yes
Humidity
Operating: 5% to 95% (non-condensing)
Storage: Max.90% (non-condensing)
Temperature Range
Operating: -20ºC to 70ºC
Storage: -40ºC to 90ºC
Dimension
95 X 105 x 18 (mm)
SYSTEM INFORMATION
Processor
Qualcomm-Atheros AR9342
System Memory
64MB DDR2
NOR Flash
8MB (max 16MB optional)
1
PCIe Slot
9.2mm height miniPCIe slot
Antenna Connector
2 x U.FL
5GHz
On-board Radio
Transmit
Power
Data Rate
Aggregate Power
HT20 MCS0
25dBm
HT20 MCS7
19dBm
HT40 MCS0
24dBm
HT40 MCS7
19dBm
Receiver
Sensitivity
Data Rate
5GHz
HT20 MCS0
-94dBm
HT20 MCS7
-77dBm
HT40 MCS0
-93dBm
HT40 MCS7
-75dBm
Dual Radio Embedded Board
Model: WPJ342
FEATURES
 CompexWRT and OpenWRT firmware supported
 Qualcomm-Atheros 560MHz Networking Processor
 Dual Radio Solution (one 2x2 11n 5Ghz on-board radio and one
miniPCIe slot that supports all Compex 802.11n WLE series)
 Integrated Passive PoE (alternative 802.3af PoE available)
 Support 2 x FE Port
APPLICATIONS
 Dual Band, Dual Concurrent AP
 802.11a/n+802.11b/g/n AP
 Point to Point / Point to MultiPoint
 Base Station
 CPE
TECHNICAL SPECIFICATION
S