User's Manual

ManualsBrandsCompex Technologies ManualsNetwork CardCompex Technologies WIRELESS-G WLP54G

Quick Install Guide

Compex Wireless-G

Network PCI

Adapter

WLP54G

Ordering Information: WLP54G 2a

Version 1.2

1. Introduction

iWave

Figure 1 Compex iWavePort WLP54G

Compex iWavePort WLP54G is a 54Mbps PCI Wireless LAN

adapter. Utilizing 2.4GHz radio frequency band, Compex iWavePort

WLP54G provides 54Mbps network connectivity via open air. Data

security is facilitated with either 64-bit or 128-bit WEP (Wired

Equivalent Privacy). Compex iWavePort WLP54G supports easy

Plug and Play installation. Compex iWavePort WLP54G combines

simplicity, data privacy and reliability for your wireless network.

2. Hardware Installation

Actual product appearance may slightly differ depending on the

hardware version.

Figure 2 Inserting Compex iWavePort WLP54G into PCI slot

The following installation process is operated under Windows XP.

For installation process operating under 98SE//ME/2000, kindly refer

to the Drivers & Utilities Installation Guide in the Product CD. If you

have installed the Wireless PC Card driver & utility before,

please uninstall the old version first.

1. Turn off your PC and switch off the power from the power point.

2. Insert Compex iWavePort WLP54G into your PCI slot as shown

above.

3. Power up your PC.

Compex iWavePort WLP54G

PCI slot

Summary of content (4 pages)

PAGE 1
. Introduction Quick Install Guide iWave Compex Wireless-G Network PCI Adapter WLP54G Ordering Information: WLP54G 2a Version 1.2 Figure 1 Compex iWavePort WLP54G Compex iWavePort WLP54G is a 54Mbps PCI Wireless LAN adapter. Utilizing 2.4GHz radio frequency band, Compex iWavePort WLP54G provides 54Mbps network connectivity via open air. Data security is facilitated with either 64-bit or 128-bit WEP (Wired Equivalent Privacy). Compex iWavePort WLP54G supports easy Plug and Play installation.
PAGE 2
3. Utility and Driver Installation 1. Power on your PC and your system will detect new hardware automatically. Click Cancel to terminate the driver installation. 5. Click Finish to complete the utility installation. At the same time, your system has installed the driver to your computer. However, you will notice that the RALINK Wireless Utility screen appears automatically, together with the RALINK Wireless Network Card Setup.
PAGE 3
To change the location that you have placed your Compex iWavePort WLP54G, 1. Go to Start Menu, Programs, Ralink, RT2500 and select CCS. 4. Un-install Compex iWavePort WLP54G Please note that you need to close all programs before uninstalling your Compex iWavePort WLP54G. 1. From your Start menu, go to Programs, Ralink, RT2500 and select UnInstall. 2. Select the Remove radio button and click on the Next> button. 3. Your system will prompt you if you want to remove the application completely.
PAGE 4
This document may become superseded, in which case you may find its latest version at: http://www.compex.com.sg/prodspec.asp?f=Manual&s=1 Technical Specification Network Protocol, Standards and Electrical Emissions Industry Standards Interoperable with • IEEE 802.11g (OFDM) • IEEE 802.11b (DSSS) • • Safety Certifications Disclaimer: Compex, Inc.