User's Manual

9. To activate the utility program if you have already exited it,
simply proceed to Start Menu, Programs, RaLink and select
RT2500. From RT2500, select RaConfig2500.
Once you click on the utility option, the following screen shot will
appear. You may start to configure your Compex iWavePort
WLP54G. The icon ( as circled in blue) indicates that the connection
is successful.
For details in using the Utility, refer to the User’s Manual stored in
the Product CD.
You may also use Wireless Zero Configuration utility that is only
available in Windows XP to configure your Compex iWavePort
WLP54G. However you need to exit from the Compex utility before
accessing to Windows XP Wireless Zero Configuration utility.
Refer to User’s Manual Appendix III “Windows XP Wireless Zero
Configuration Utility” for details.
To change the location that you have placed your Compex
iWavePort WLP54G,
1. Go to Start Menu, Programs, Ralink, RT2500 and select CCS.
4. Un-install Compex iWave Port WLP54G
Please note that you need to close all programs before uninstalling
your Compex iWavePort WLP54G.
1. From your Start menu, go to Programs, Ralink, RT2500 and
select UnInstall.
2. Select the Remove radio button and click on the Next> button.
3. Your system will prompt you if you want to remove the
application completely. Click OK button to proceed.
4. Unplug your Compex iWavePort WLP54G from your PCI slot
and click OK button to complete the un-installation process.