User's Manual

31
6
Installation
The detector is composed of sensitive electronic parts and components. Use ESD protection while installing the
detector in its operation place. It is recommended to use the product in a clean place and to exercise caution to
ensure that it is not affected by dust or liquids. When the detector is contaminated, it is recommended to use a
dry and soft cloth to clean the detector housing, and be sure to respect to ESD safety conditions.
Detector connection
1) Wireless system
1) Wireless System Installation
A. Attach the battery to the detector.
B. Connect the AC power supply cord of the AP.
C. Connect the AP Ethernet cable (BT-EC02) to the workstation.
D. Power on the Detector.
E. Check the WiFi LED of the detector and connect the AP and detector.