User's Manual

38
Network Setting
Notice
▩ You must use a NIC which supports Gigabit Ethernet.
A. IP Settings
1. Set the PC IP to belong to the same Broadcast domain with the sensor.
Set the C class of the PC IP to 3 since the Sensor IP is 192.168.3.240.
Notice
▩ You can set the Host PC IP as 192.168.3.XXX, and the XXX can be any number between 1 and 255.
▩ When you set the Host PC IP, avoid 192.168.3.240 since it is the Sensor IP given by the factory.
▩ If you cannot set the C class of the PC IP to 3, notify the customer service to change the Sensor IP.
2. Set the Subnet Mask to 255.255.255.0.