User's Manual

39
B.Router Setting
1. Change router to AP mode.
2. Set SSID to “bsdw#1”
3. Set password to “bontech1”
4. Set the Router IP’s 192.168.3.xxx.
5. When the detector power on, it is connected to the router.
Notice
▩ The setting method for each router may be different.
▩ The detector must be set to wireless mode.
PC Firewall Settings
Use after turning off the firewall settings.
Notice
▩ Depending on the Firewall settings, the RawImageViewer cannot be operating. Please make sure if all firewall settings
including individual firewall, corporate firewall, and Windows Firewall are turned Off.
▩ Depending on the Anti-virus S/W settings, the RawImageViewer cannot be operating. Please make sure if V3,
Macafee, Norton, Microsoft Security Essentials, Windows Defender, or any other Anti-virus S/W is deactivated
or closed.
Image Acquisition S/W
Exe File and Directory Settings
1. Copy the BSD folder from the provided CD and paste it into C:\ of the PC to install the program. It should be
C:\ where you paste the BSD folder into.
Notice
▩ The structure of the BSD folder pasted into C:\ is as follows:
▩ The structure and functions of the folders are as follows: