User's Manual

58
9
Inspection and Maintenance
Caution
(Attention)
The instrument must be repaired by a qualified engineer only. If it is not repaired properly,
it may cause fire, electric shock, or accident.
L'instrument ne doit être réparé que par un ingénieur qualifié. S'il n'est pas réparé
correctement, il peut causer un incendie, un choc électrique ou un accident.
Warning
(Avertissement)
For safety reasons, be sure to inspect the instrument before using it. In addition, carry out a
regular inspection at least once a year.
Pour des raisons de sécurité, assurez-vous d'inspecter l'instrument avant de l'utiliser. De
plus, effectuer une inspection régulière au moins une fois par an.
Inspection
In order to ensure that the instrument is used safely and normally, please be sure to inspect the instrument
before use. If any problem is found during the inspection, please take measures indicated in this chapter. If
problem still cannot be corrected, please contact BONTECH representative or distributor. It is recommended that a
record of the inspection be kept by making copies of the check lists in this section, or making a separate check
list.
Inspection Action
Daily ▩ Acquire a Dark Image before Image Acquisition.
▩ Check if cables are not damaged. If damaged, contact BONTECH representative or
distributor.
▩ Check if the cover or parts are not damaged and not loose. If damage or loose, contact
BONTECH representative or distributor.
▩ Check the LED indicators, if LED indicators do not show on, check the power cable
connection. If the problem remains, contect BONTECH representative or distributor.
Monthly ▩ Check the performance of the device by performing exposures using a phantom or a
resolution chart.
Yearly ▩ Check the performance of the device by performing exposures using a phantom or a
resolution chart.