User's Manual

The e-Re Model device is intended for use in an electromagnetic environment in which radiated RF disturbances

are controlled. The customer or the user of the e-Re Model device can help prevent electromagnetic interference

by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters)

and the e-Re Model device as recommended below, according to the maximum output power of the

communications equipment.

Rated maximum

output power of

transmitter W

Separation distance according to frequency of transmitter m

150 kHz to 80 MHz

80 MHz to 800 MHz

800 MHz to 2,5 GHz

0,01 0,12 0,12 0,23

0,1 0,38 0,38 0,73

1 1,2 1,2 2,3

10 3,8 3,8 7,3

100 12 12 23

For transmitters rated at a maximum output power not listed above, the recommended separation distance

metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where

is the

maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption

and reflection from structures, objects and people.