Specifications

Page 24
Connect the RJ45 Ethernet cable attached to the PoE Injector to a network device,
such as to a switch or to the PC you will use to configure the access point.
PoE power input: 7A and 7C use Passive PoE (range 12V – 24V DC)
Connect the power adapter in the PoE kit to the main electrical supply and the power
plug into the socket of the injector.
Now, turn on your power supply. Notice that the POWER LED has lighted up. This indicates
that the access point is receiving power through the PoE Injector and that connection
between the access point and your network has been established.
Note:
Please use the power adapter in the PoE kit. Using a power adapter with a different
voltage rating will damage this product.