Install guide

Chapter 4 Panel Views and Descriptions
20
11 1, 2, 3 (Ethernet Ports) Integrated 3-port 10/100Mbps Switching
(RJ45)
12 4 POE (PoE Port ) If using power adapter:
Connect to your PC or network hub or switch
If using PoE:
Connect to PoE injector
13 5V DC (DC Input) 5V DC power input
14 Reset (Push Button) To reboot, press once.
To reset password, press and hold the button
for 5 seconds. The DIAG LED will flash fast for
about 5 flashes/sec before releasing the
button.
To restore the factory default settings, press
and hold the button for more than 10
seconds. The DIAG LED will flash slowly for
about 10 flashes/sec before releasing the
button.