Specifications

174
WLAN State
SYNTAX DESCRIPTION
Get wlanstate Display whether status of current wireless operation is Enabled or
Disabled.
Set wlanstate enable/disable Set to Disable to turn off wireless operation.
Set to Enable to turn back on wireless operation.
Note:
When executing this command, please ensure that you are not
connected on wireless with device or you will be disconnected from
the device and network.
The wireless operation can only be Enabled from the Ethernet port or
UTP cable connection to device.
Reset Button
SYNTAX DESCRIPTION
Get buttonpassreset Display the status of Reset Button operation.
If status is (Enabled), resetting of password by pressing Reset Button is
allowed.
If status is (Disabled), resetting of password by pressing Reset Button is
not allowed.
Set buttonpassreset enable/disable Set to Disable to prevent resetting of password by pressing Reset
button.
Set to Enable to allow resetting of password by pressing Reset button.