Specifications
122 en | Terminal Operation SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
interface or RAIDWatch Manager is used, you can only access the subsystem by providing the
correct password.
7.13.3 Changing the Password
To set or change the controller password, move the cursor bar to Change Password, then
press [ENTER].
If a password has previously been set, the controller will ask for the old password first. If the
password has not yet been set, the controller will directly ask for the new password. The
password cannot be replaced unless the correct old password is provided.
Key-in the old password, then press [ENTER]. If the password is incorrect, it will not allow you
to change the password. Instead, it will display the message “Password incorrect!,” then go
back to the previous menu.
If the password is correct, or there is no preset password, it will ask for the new password.
7.13.4 Setting a New Password
Fig. 7.62 Set New Password Screen
Enter the desired password in the column, then press [ENTER]. The next dialog box will dis-
play “Re-Enter Password.” Enter the password again to confirm and press [ENTER].
The new password will now become the controller’s password. Providing the correct pass-
word is necessary when entering the Main Menu from the initial screen.
7.13.5 Disabling the Password
To disable or delete the password, press [ENTER] in the empty column that is used for enter-
ing a new password. The existing password will be deleted. No password checking will occur
when entering the Main Menu or when making a configuration change.
i
NOTICE!
• The controller verifies the password when entering the Main Menu from the initial screen
or when making a configuration change. If the controller is going to be left unattended,
the “Password Validation Timeout” can be set to “Always Check.” Setting the validation
timeout to “Always Check” will protect the controller configuration from any unautho-
rized access.
• The controller password and controller name share a 16-character space. The maximum
numbers of characters for the controller password is 32. If the controller name occupies
32 characters, there is only one character left for the controller password, and vice versa.