Specifications

180 en | S.M.A.R.T. Configuration SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
4. Detect and Clone + Replace
The controller will enable all drives' S.M.A.R.T. function. If a drive predicts a problem, the
controller will report the problem in the form of an event log. The controller will then
clone the problematic drive to a standby spare and take the problematic drive offline as
soon as the cloning process is completed.
i
NOTICE!
If you are using drives of different brands in your RAID system, as long as they are ANSI-SCSI
Informational Exception Control (IEC) document X3T10/94-190-compatible, there should not
be any problems working with the controller/subsystem.