Specifications

70 en | LCD Keypad Operation SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
5.12 Viewing and Editing Channels
5.12.1 Viewing IDs
Press ENT for two seconds to enter the Main Menu. Press the up or down arrow keys to select
"View and Edit Channels," then press ENT.
Channel information will be displayed. Press ENT on the host channel you wish the ID
changed.
Press the up or down arrow keys to select “Set SCSI Channel ID," then press ENT.
Use the up or down arrow keys to browse through the existing host IDs. Press ENT on any ID
combination to continue.
5.12.2 Adding a Channel ID
Press ENT on a host channel, on “Set Channel ID”, and then on an existing ID.
Use the up or down arrow keys to choose “Add Channel SCSI ID", then press ENT.
Use the up or down arrow keys to choose the ID you wish to add, then press ENT for two sec-
onds to complete the process.
A prompt will remind you to reset the subsystem for the configuration change to take effect.
You may press ENT to reset the subsystem immediately or you may press ESC to continue add-
ing other host IDs and reset the subsystem later.