Getting Started Guide
Table Of Contents
- Introduction
- Shipping Carton Contents
- Setting up the Appliance
- Connecting the Cables
- First Time Deployment Options
- Appliance Diagramals and Specifications
- Using the First Time Configuration Wizard
- Starting the First Time Configuration Wizard
- Welcome
- Authentication Details
- Appliance Date and Time Settings
- Appliance Name
- Security Policy Management
- Internet Connection
- Local Network
- Wireless Network
- Administrator Access
- Appliance Registration
- Security Management Server Authentication
- Security Management Server Connection
- Software Blade Activation
- Summary
- Zero Touch Cloud Service
- USB Drive or SD Card
- Health and Safety Information
- Support
Appliance Date and Time Settings
1570/1590 Appliance R80.20.05 Getting Started Guide|29
Appliance Date and Time Settings
In the Appliance Date and Time Settings page, configure the appliance's date, time, and time zone
settings manually or use the Network Time Protocol option.
When you set the time manually, the host computer's settings are used for the default date and time
values. If necessary, change the time zone setting to show your correct location. Daylight Savings Time is
automatically enabled by default. You can change this in the WebUI application on the Device > Date and
Time page.
n
Date - The host computer's date appears by default. If required, set a different date.
n
Time - The host computer's time appears by default. If required, set a different time.
n
Time Zone - The host computer's time zone appears by default. If required, select a time zone
setting to reflect your exact location.
n
Primary NTP server - The IP or host name of the primary NTP server. The default server is
ntp.checkpoint.com
n
Secondary NTP server - The IP or host name of the secondary NTP server. The default server is
ntp2.checkpoint.com