Getting Started Guide
Table Of Contents
- Introduction
- Shipping Carton Contents
- Setting up the Appliance
- Connecting the Cables
- First Time Deployment Options
- Appliance Diagramals and Specifications
- Using the First Time Configuration Wizard
- Starting the First Time Configuration Wizard
- Welcome
- Authentication Details
- Appliance Date and Time Settings
- Appliance Name
- Security Policy Management
- Internet Connection
- Local Network
- Wireless Network
- Administrator Access
- Appliance Registration
- Security Management Server Authentication
- Security Management Server Connection
- Software Blade Activation
- Summary
- Zero Touch Cloud Service
- USB Drive or SD Card
- Health and Safety Information
- Support
Setting up the Appliance
1570/1590 Appliance R80.20.05 Getting Started Guide|8
Setting up the Appliance
1.
Remove the Check Point 1570/1590 Appliance appliance from the shipping carton and place it on a
tabletop.
2. Optional - Remove the transparent protective sticker from the front panel of the appliance.
3.
Attach antennas to the model (WiFi and LTE models only).
4.
Identify the network interface marked as LAN1. This interface is preconfigured with the IP address
192.168.1.1.
Wall Mounting
To mount the appliance to the wall:
1.
Place the wall-mount sticker on the wall and drill two holes for the screws.
2.
Attach the 2 screws in the accessory kit (M4*6) to the wall.
3.
Mount the appliance and verify the 2 screws are fastened well to the appliance.
Key Item Description
1 Holes on the bottom of the appliance Attach screws here.