Getting Started Guide
Table Of Contents
- Introduction
- Shipping Carton Contents
- Setting up the Appliance
- Connecting the Cables
- First Time Deployment Options
- Appliance Diagrams and Specifications
- Using the First Time Configuration Wizard
- Starting the First Time Configuration Wizard
- Welcome
- Authentication Details
- Appliance Date and Time Settings
- Appliance Name
- Security Policy Management
- Internet Connection
- Local Network
- Wireless Network
- Administrator Access
- Appliance Registration
- Security Management Server Authentication
- Security Management Server Connection
- Software Blade Activation
- Summary
- Zero Touch Cloud Service
- USB Drive or SD Card
- Health and Safety Information
- Support
First Time Deployment Options
1590 Appliance R80.20 Getting Started Guide|15
Key Item Description
1 Reset Short press resets the system but does not remove any user parameters.
2 Ground screw Functional grounding.
3 Factory default Press the button continuously for 12 seconds to restore the appliance to its
factory default. All user parameters previously configured are removed.
4 LAN ports LAN ports 1-8.
10/100/1000MbE
5 DMZ fiber SFP
port
DMZ combination port. The LEDs above indicate connection and speed (see
below).
1GbE speed, short and long range.
6 RJ45 DMZ and
WAN1 combo
port
The DMZ is a combo port of SFP and RJ45 (on the right). Only one can
operate a time once plugged in and connected.
10/100/1000MbE
7 USB port 3.0 USB port 3.0 for SW download and external dongle as WiFi.
8 Console Plug in the serial console cable here. Baud rate: 115200.
9 Power cord
socket
Plug the power adapter cord in here.