Getting Started Guide
Table Of Contents
- Introduction
- Shipping Carton Contents
- Setting up the Appliance
- Connecting the Cables
- First Time Deployment Options
- Appliance Diagrams and Specifications
- Using the First Time Configuration Wizard
- Starting the First Time Configuration Wizard
- Welcome
- Authentication Details
- Appliance Date and Time Settings
- Appliance Name
- Security Policy Management
- Internet Connection
- Local Network
- Wireless Network
- Administrator Access
- Appliance Registration
- Security Management Server Authentication
- Security Management Server Connection
- Software Blade Activation
- Summary
- Zero Touch Cloud Service
- USB Drive or SD Card
- Health and Safety Information
- Support
Welcome
1590 Appliance R80.20 Getting Started Guide|19
Welcome
The Welcome page introduces the product and shows the name of your appliance.
You can connect to the Zero Touch server to fetch settings automatically from the cloud.
To change the language of the WebUI application:
Select the language link at the top of the page.
Note - Only English is allowed as the input language.
Zero Touch
Zero Touch enables a gateway to automatically fetch settings from the cloud when it is connected to the
internet for the first time.
Note - You cannot use Zero Touch if you connect to the internet with a proxy server.
If the gateway connects to the internet through DHCP, the gateway will fetch the Zero Touch settings
without any additional action. If no DHCP service is available, you must run the First Time Configuration
Wizard, configure the Internet Connection settings, and then fetch the settings from the Zero Touch
server.