Service manual

Ultraview 1030/1050 Monitors — Service Manual
2-25
Setup
ANALOG Key
Selecting the ANALOG key displays the battery charge rate menu and its displays. Two different
displays exist, one when the monitor is connected to AC power, the other when the monitor is not.
voltage %full AC/DC
batteries (A & B) ******* *** AC
battery charge current(A) : 1.30
battery resistance(KOhms) : 1.860
battery charge rate : Calculated
3.3V power used (W) : 2.50
5V power used (W) : 7.25
+/-12V power used (W) : 10.30
Total power used (W) : 20.050
power supply temperature (C) : 46
digital temperature : 42
line voltage (V) : 17.411
voltage %full AC/DC
batteries (A & B) 10.619 10 DC
battery charge current(A) : ****
battery resistance (KOhms) : ****
battery charge rate : **********
3.3V power used (W) : 2.50
5V power used (W) : 6.18
+/-12V power used (W) : 12.71
Total power used (W) : 22.64
power supply temperature (C) : 46
digital temperature : 40
line voltage (V) : ******
WIRELESS Key
Selecting the WIRELESS key displays the wireless information screen and menu. The radio
statistics are displayed about this menu. CLEAR STATISTICS clears the statistics in the radio
(which are currently displayed), restarts the radio, and updates this screen. “No statistics” may be
displayed depending on the timing of this screen update. The PRINT button prints all the
information displayed on the screen. The PRINT key enables you to print all the information
displayed on the screen.
with AC power
without AC power
CLEAR
STATISTICS
PRINT