Service manual

Ultraview 1030/1050 Monitors — Service Manual

2-26

SITE SURVEY Key

The SITE SURVEY key is disabled if the radio is not running. This key displays this monitor’s site

survey screen and menu. The following illustrates this screen’s display on any of the Ultraview

1030/1050 monitors. The channel line and the current page number are displayed in the upper

right of the display. CLEAR ALL clears the display.

Channel 08 Page 1

Master:

MAC Node Bed Name Signal

* 0020A6203FC9 2 02VIP 178

* 7 07VIP 178

* 14 14PCS 166

* 25 25VIP 166

Slave:

MAC Node Bed Name Signal

* 0020A62024CF 10 010R 177

* 0020A6203FCC 12 12VIP 178

* 0020A6203FC9 45 045RB 179

PRINT Key

Selecting this key prints the display.

CHANGE PASSWORD Key

The CHANGE PASSWORD key enables you to change the password that allows access to the

Privileged Access menus.

To set or change the password:

1 Select the CHANGE PASSWORD key to display the on-screen keyboard and the password

prompts.

2 Key in your new password (9 characters maximum) at the New Password: ___ prompt. Select

ENTER.

3 Enter this new password a second time at the Verify Password: __ prompt. Select ENTER.

RESET MONITOR Key

Touch the RESET MONITOR key to reset the monitor after changing configuration settings, etc.

You will not lose patient data when resetting from this key.

PAGE

CLEAR

ALL