USER MANUAL Wireless Network Video Recorder N4JWA 1
USER MANUAL Chapter 1 Safety Instruction ............................................................................... 4 Chapter 2 Product Overview............................................................................... 5 1.1 Rear Panel ............................................................................................................5 1.2 Remote Controller (For Reference Only)..................................................................6 Chapter 3 WIRELESS NVR Common Operations ....
USER MANUAL 5. 5.1 Disk ................................................................................................................. 36 5.5.2 S.M.A.R.T ......................................................................................................... 37 5.5.3 Cloud.............................................................................................................. 38 5.6 System ..............................................................................................................
USER MANUAL Chapter 1 Safety Instruction Please carefully read the following safety instruction so as to avoid personal injuries and prevent the equipment and other connection devices from being damaged. 1. Power sources (note: please use the power supply attached or specified by the manufacturer) Never operate the equipment by using unspecified power supply. 2.
Chapter 2 Product Overview 1.1 Rear Panel NO Physical interface Connection 1 Ground connection A terminal to connect a separate ground cable. * Make sure to add a ground cable in order to use the equipment safely. 2 Antenna Receive signal from wireless camera. 3 SD SD Port 4 USB port Connect with USB. 5 VGA port Connect with VGA display devices,such as PC monitor. 6 HDMI Connect with HDMI display devices,such as PC monitor. 7 WAN:(RJ45) Network port Connect with WAN,Ethernet cable.
USER MANUAL 1.2 Remote Controller (For Reference Only) No.
USER MANUAL Chapter 3 WIRELESS NVR Common Operations 3.1 Using the Supplied Mouse Left Button of Mouse Right Button of Mouse Click once to choose an item in the menus and confirm your selection. Click once to open the pop-up menu on the Live Viewing screen and to exit from the menus. Click once upon a channel on Live Viewing screen to open Camera Quick Toolbar Double-click on the channel on the exit from the menus. Live Viewing screen to view the channel in full screen mode.
USER MANUAL 3.3 Password For the first time when you run the WIRELESS NVR, you must be required to set your own password immediately in order to protect your privacy. Please be sure to record your username and password and save them in a secure place. Language: Choose an OSD language Device ID: Input the device ID in the parentheses. Default ID is 000000. View more about Device ID on 5.6.1 General. New Admin name: To set your own administrator name. New Admin Password: To set your own password.
USER MANUAL Chapter 4 WIRELESS NVR Starting up 4.1 Startup Wizard Startup Wizard will help to configure the system and get the WIRELESS NVR works quickly. 4.1.1 Start Wizard Click the Start Wizard to proceed to the next step 4.1.2 Network Configuration If you connect to a router allows to use DHCP, please check the DHCP box. The router will assign automatically all the network parameters for your WIRELESS NVR.
USER MANUAL Subnet Mask: Subnet mask is a network parameter which defines a range of IP addresses that can be used in a network. If IP address is like a street where you live then subnet mask is like a neighborhood. The subnet address also consists of four groups of numbers, separated by periods. For example, “255.255.000.000”. Gateway: This address allows the WIRELESS NVR to access the Internet. The format of the Gateway address is the same as the IP Address. For example, “192.168.001.001”.
USER MANUAL 4.1.3 Date/Time This menu allows you to configure the Date, Time, Date Format, Time Format, Time Zone, NTP and DST. Date and Time Click on the calendar icon to set the current system date. Date: Click on the calendar icon to set the system date. Time: Click to set the system time. Date Format: Choose from the dropdown menu to set preferred date format. Time Format: Choose time format between 24Hour and 12Hour. Time Zone: Set the correct time zone. NTP NTP stands for Network Time Protocol.
USER MANUAL DST DST stands for Daylight Savings Time. DST: Enable if Daylight Saving Time (DST) is observed in your region Time Offset: Select the amount of time to offset for DST Time Mode: Choose to set the daylight saving time in weeks or in days Start Time/End Time: Set the start time and end time for daylight saving 4.1.4 Disk If the HDD is installed in the WIRELESS NVR for the first time, it must be formatted. Select the HDD and then click Format HDD button to format the HDD.
USER MANUAL 4.1.5 Resolution Choose an output resolution matches to your monitor. The WIRELESS NVR supports to adjust the output resolution automatically to match the best resolution of your monitor when the system is starting up. 4.1.6 Mobile If your WIRELESS NVR come with a P2P ID, you can scan the QR code with your mobile app to view the WIRELESS NVR remotely.
USER MANUAL 4.1.7 Summary You can check the system summary information you had set in the start wizard and finish the wizard. Tick “Don't show this window next time" if you don’t want to display Start Wizard when system reboot next time. Click Finish button to save & exit. 4.
USER MANUAL Status Icons This indicates that the WIRELESS NVR is currently recording. This icon appears when the camera has detected motion. This icon indicates that the HDD is in error to work This icon indicates the HDD is unformatted This icon indicates the HDD is full. Hard disk not found. Click to enter pairing. 4.2.1 Camera Quick Toolbar In live viewing, click the left button of your mouse on a connected camera to display the Camera Quick Toolbar. Click to manually record the channel immediately.
USER MANUAL 4.2.2 Taskbar Click to open the Start Menu Click to choose different layout for live view Click to start viewing channels in a sequence Quick playback. You can choose to play the latest recording for all channels from the beginning of the day, or you can choose the playback from the latest 5s, 10s, 30s, 1Min, 5Min. Click to switch all Wireless channels between mainstream and substream (for live view resolution) Click to switch among real-time, balanced, or smooth view.
USER MANUAL 4.2.3.1 Unlock and Lock Screen The screen will be locked to protect unauthorized OSD operation while the NVR is not in menu operation 1 minute. If necessary, you can also lock the screen operation manually. To do so, go to Star Menu, and then click the Lock Screen icon to lock the system immediately. If the system is locked, you can click the Unlock icon system for further operation. 4.2.3.
USER MANUAL Click the Shutdown button from Star Menu, and the check the further action you want to move. Click OK button, system will require to input the Admin password to authenticate. If you choose Logout the system, the live viewing screen will be disappeared. You will need to login the system for further operations.
USER MANUAL Chapter 5 WIRELESS System Setup You are able to configure the WIRELESS NVR for Channel, Record, Alarm, Network, Device & System from Start Menu Setup. 5.1 Channel In this section, you are allowed to configure the Wireless camera, live view display, manage Wireless cameras,motion setup, Video Cover. 5.1.1 Channel Region: NA/UK/MKK depending on the region. Wireless Band selection: Auto or Manual optional. Auto is recommended. Wireless Channel: Wireless Channel.
USER MANUAL 5.1.2. Live To configure camera parameters. Channel: Display channel number. icon into the setup page.
USER MANUAL 5.1.3 Motion This menu allows you to configure motion parameters. When motion has been detected by one or more cameras, your WIRELESS NVR will alert you to a potential threat at your home. It does this by sending you an email alert with an attached image from the camera to use as a reference (if this option is enabled) and/or sending push notifications via the mobile app. Setup: Click icon into the setup page. Switch: Enable or disable motion detection.
USER MANUAL Channel: Display channel number. Buzzer: The WIRELESS NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer duration in seconds when the motion is detected. icon and choose which channel(s) you want to record when the motion Record: Click detection is triggered. Post Recording: You can set how long after an event occurs that the WIRELESS NVR will continue to record. The recommended recording length is 30 seconds but it can be set higher up to 5 minutes.
USER MANUAL 5.1.5 Video Cover This menu allows you to create privacy zone(s) if you want to partially cover some certain part of the image. Enable the Privacy Zone, You can create up to privacy zones in any size and location on the camera image. The zone(s) appear as “red box”. Note: The area of privacy zones you had set will be invisible in both live view & recording video.
USER MANUAL 5.2 Record 5.2.1 Record This menu allows you to configure the channel recording parameters. Channel: Display channel number. Record Switch: Enable in order to allow the video to be recorded to the HDD. Stream Mode: Choose the recording resolution. The available options are Mainstream and DualStream. PreRecord: If this option is enabled, the WIRELESS NVR starts recording a few seconds before an event occurs. Use this option if your primary recording type is motion based.
USER MANUAL 5.2.2 Record Schedule This menu allows you to specify when the WIRELESS NVR records video and define the recording mode for each channel. The recording schedule lets you set up a schedule like, daily and hourly by normal (continuous) recording, motion recording. To set the recording mode, click first on the mode radio button (Normal, Motion), then drag the cursor to mark the slots. The recording schedule is valid only for one channel.
USER MANUAL 5.2.3 Capture This menu allows to configure the image capture function. Auto Capture: Enable or disable automatic capturing on the channel. When this feature is enabled, you can select the snapshot capturing interval. NOTE: When the Auto Capture is enabled, you can select the image capturing interval. Stream Mode: Select the image resolution by mainstream or substream.. Normal Interval: Snapshots are captured based on normal interval.
USER MANUAL Capture Schedule Channel: Select the channel to set its snapshot capturing schedule. Normal: When the time slot is marked green, this indicates the channel is capturing snapshots based on the Normal Interval. Motion: When the time slot is marked yellow, this indicates the channel is capturing snapshots based on Alarm Interval only when a motion is detected. No Capturing: A time slot marked black means that there is no snapshot capturing scheduled for the time slot.
USER MANUAL 5.3 Alarm In these section, you can configure the alarm parameters. 5.3.1 Motion Operation is same as 5.1.3 Motion 5.3.2 Exception This menu allows you to set the type of events that you want the WIRELESS NVR to inform you. Event Type: Select the event type from below options: - No Space on Disk: When an HDD is full. - Disk Error: If the HDD is not detected properly. - Video Loss: If a camera is not connected properly. Switch: Check the box to enable the monitoring of the event.
USER MANUAL 5.4 Network This menu allows you to configure network parameters, such as PPPoE, DHCP. The most common types are DHCP. Most probably your network type is DHCP, unless the network is manually addressed. If you need an authentication user name and password to the Internet, then choose PPPoE. 5.4.1 General If you connect to a router allows to use DHCP, please check the DHCP box. The router will assign automatically all the network parameters for your WIRELESS NVR.
USER MANUAL DNS1/DNS2: DNS1 is the primary DNS server and DNS2 is a backup DNS server. Usually should be enough just to enter the DNS1 server address. 5.4.1.1 PPPoE This is an advanced protocol that allows the WIRELESS NVR to connect to the network more directly via DSL modem. Check the “Enable PPPOE” box, and then enter the User name & Password of the PPPoE. Click Apply to save, system will reboot to active the PPPoE setting.
USER MANUAL 5.4.1.2 Port Configuration Web Port: This is the port that you will use to log in remotely to the WIRELESS NVR (e.g. using the Web Client). If the default port 80 is already taken by other applications, please change it. Client Port: This is the port that the WIRELESS NVR will use to send information through. If the default port 9000 is already taken by other applications, please change it.
USER MANUAL 5.4.2 DDNS This menu allows you to configure DDNS settings. The DDNS provides a static address to simplify remote connection to your WIRELESS NVR. To use the DDNS, you first need to open an account on the DDNS service provider’s web page. DDNS: Check to enable DDNS. Server: Select the preferred DDNS server (DDNS_3322, DYNDNS, NO_IP, CHANGEIP, DNSEXIT). Domain: Enter the domain name you created on the DDNS service provider’s web page.
USER MANUAL 5.4.3 Email This menu allows you to configure email settings. Please complete these settings if you want to receive the system notifications on your email when an alarm is triggered, HDD becomes full, HDD is in error state, or Video Loss occurs. 5.4.3.1 Email Configuration Email: Check to enable. Encryption: Enable if your email server requires the SSL or TLS verification. If you are not sure, set to be Auto. SMTP Port: Enter the SMTP port of your email server.
USER MANUAL SMTP Server: Enter the SMTP server address of your email. User Name: Enter your email address. Password: Enter the password of your email. Receiver 1~3: Enter the email address where you want to receive the event notifications from the WIRELESS NVR. Interval: Configure the length of the time interval between the notification emails from the WIRELESS NVR. To make sure all settings are correct, click Test Email. The system sends an automated email message to your inbox.
USER MANUAL 5.4.4 FTP This menu allows you to enable FTP function to view and load captured snapshots from WIRELESS NVR to your storage device over FTP. FTP Enable: Click to enable FTP function. Server IP: Enter your FTP server IP address or domain name. Port: Enter the FTP port for file exchanges. Name/ Password: Enter your FTP server user name and password. Directory Name: Enter the default directory name for the FTP file exchanges. Test FTP: Click to test the FTP settings.
USER MANUAL 5. 5 Device In this section, you can configure the internal HDD function. 5. 5.1 Disk This menu allows you to check & configure the internal HDD(s). You need to format the HDD only at the first startup and if you replace a new HDD. Format HDD: Select the HDD you want to format and then click Format HDD. To start formatting, you need to enter your user name and password and then click OK to confirm to continue formatting.
USER MANUAL 5.5.2 S.M.A.R.T This function can be used to display technical information on the hard drive installed inside your WIRELESS NVR. You can also perform a test (there are three types available) to evaluate and detect potential drive errors. Whole Evaluation not passed, continue to use the disk: If for some reason the hard drive has developed a fault (such as one or more bad sectors), you can instruct your WIRELESS NVR to continue saving to the drive.
USER MANUAL 5.5.3 Cloud This menu allows you to see what is happening on your camera site anytime, It can upload the captured pictures to Dropbox at normal time, or when motion detection happens.
USER MANUAL click permit. DVR cloud storage function will be activated. If you have logged in your dropbox account before Cloud storage activation, then no need to relogin. Just click Permit to complete the activation. Please finish the activation within 3 minutes. After activation is completed, you can use the Cloud storage function. 7) Click the icon at the upper-left of dropbox account interface to view the folder made in the 5th step. 8) Open the Dropbox folder to view the DVR captured pictures. 5.
USER MANUAL Language: Select a language you would like the system menus to be displayed in. Multiple languages are available. Video Format: Select the correct video standard for your region. Menu Timeouts: Click the drop-down menu to select the time your WIRELESS NVR will exit the Main Menu when idle. You can also disable this by selecting “OFF” (password protection will be temporarily disabled).
USER MANUAL 5.6.1.2 NTP Settings The NTP (Network Time Protocol) function allows your WIRELESS NVR to automatically sync its clock with a time server. This gives it the ability to constantly have an accurate time setting (your WIRELESS NVR will periodically sync automatically). Check to enable the NTP, and select a Server Address, click Update Now to manually sync the date & time. Click Apply to save your settings.
USER MANUAL Time Offset: Select the amount of time that Daylight Saving has increased by in your time zone. This refers to the difference in minutes, between Coordinated Universal Time (UTC) and the local time. Enable DST: You can select how Daylight Saving starts and ends: Week: Select the month, a particular day and time when Daylight Saving starts and ends. For example, 2 a.m. on the first Sunday of a particular month.
USER MANUAL 5.6.2.1 LIVE-OUT Choose LIVE-OUT from the Video Output drop-down menu. SEQ Mode: Select how many video channels you would like to display when your WIRELESS NVR is in sequence mode. SEQ Dwell Time: Enter in seconds the maximum length of time you would like to display a video channel in sequence mode before displaying the next video channel (300 seconds is the maximum). Output Resolution: Select a display resolution that is suitable for your TV. 1920 x 1080 will suit most TVs.
USER MANUAL 5.6.3 Multi-user This menu allows you to configure the user name, password and user permission. The system supports the following account types: ADMIN — System Administrator: The administrator has full control of the system, and can change both administrator and user passwords and enable/disable password protection. USER — Normal User: Users only have access to live viewing, search, playback, and other functions.
USER MANUAL 5.6.3.2 Add New Users 1. Select one of the user accounts that is currently disabled, click the User Edit icon 2. 3. 4. 5. 6. 7. Select Enable from the drop-down next to User Enable. Click the field next to User Name to change the user name for the account. Select Enable from the drop-down next to Password Enable. Click the field next to Password to enter the desired password. Click the field next to Confirm to reenter the password. Click Save.
USER MANUAL 5.6.3.3 Setting User Permissions The administrator account is the only account that has full control of all system functions. You can enable or disable access to certain menus and functions of each user account. 1. Click the edit icon under Permission tab. 2. Check the boxes next to any system menus or capabilities you would like the user to access. Click All to check all boxes. Click Clear to check none of the boxes. 3. Click Save to save your modifications.
USER MANUAL 5.6.4 Maintenance In this section, you will be able to search & view the system log, load default settings, upgrade the system, export & import system parameters and manager system auto reboot. 5.6.4.1 Log The system log shows you important system events, such as motion alarms and system warnings. You can easily create a backup file of the system log for a set time period to a USB flash drive.
USER MANUAL Log Searching and Backing Up: 1. Click the field next to Start Date & Start Time to choose the starting date & time for your search from the on-screen calendar. 2. Click the field next to End Date & End Time to choose the end date & time for your search from the on-screen calendar. 3. Select the type of events you would like to search for from the dropdown next to Log Type, or select All to see the entire system log for the selected time period. 4. Click Search. 5.
USER MANUAL 5.6.4.3 Upgrade 1. Copy the firmware file (.sw file) to your USB drive, and insert the USB flash drive into the WIRELESS NVR’s USB port. 2. Click Select File button to choose the firmware file in your USB flash drive, then Click OK. 3. Click Upgrade button to start system upgrade. The system upgrade will last around 5-10 minutes, please do NOT power off the WIRELESS NVR or remove the USB from WIRELESS NVR during firmware upgrade. 5.6.4.
USER MANUAL 5.6.4.5 Auto Reboot This menu allows the system to auto reboot the WIRELESS NVR regularly. It is recommended to leave this function enabled, as it maintains the operational integrity of your WIRELESS NVR. Auto Reboot: Check to enable. Time: You can set the WIRELESS NVR to reboot by day, week or month. 5.6.5 IP Camera Maintain This menu allows you to upgrade the IP camera’s firmware and restore default settings of IP camera.
USER MANUAL 5.6.5.1 Upgrade IP Camera 1. Choose one of the IP cameras you want to upgrade firmware. 2. Click Select File select the update file from your USB flash drive, then click OK. 3. Click IPC Upgrade button to start upgrading. You will be required to input the Admin password to authenticate. Please do NOT power off the WIRELESS NVR and IP camera or remove the USB during the upgrading. 5.6.5.2 Load Default Settings for IP Camera 1. Choose the IP cameras you want to restore. 2.
USER MANUAL 5.6.6 System Information This menu allows you to view the system information, channel information, record information & network status. 5.6.6.1 Information View system information such as device ID, device model name, IP address, MAC address, firmware version and more. If your WIRELESS NVR supports P2P function, you will find the P2P ID & P2P QR code in the information page. You can scan this QR cord with mobile app to remote view the WIRELESS NVR. 5.6.6.
USER MANUAL Chapter 6 Search, Playback & Backup The Search function gives you the ability to search for and play previously recorded videos as well as snapshots that are stored on your WIRELESS NVR’s hard drive. You have the choice of playing video that matches your recording schedule, manual recordings or motion events only. The Backup function gives you the ability to save important events (both video and snapshots) to a USB flash drive. 6.
USER MANUAL Slow Play, 1/2, 1/4 and 1/8, 1/16 speed Play Pause Play frame by frame. Click once to play a frame of the video Stop Fast Forward, x2, x4, x8 and x16 Digital Zoom: Click to zoom in then click-and-drag on a camera image during playback to zoom in on the selected area. Right-click to return to regular playback. Video Clip. Quickly save a section of video to a USB flash drive. View more on 6.1.1.1 Video Clip Backup Save Video Clip.
USER MANUAL 6.1.1 Search & Play Video in General This menu gives an option to search & play recording for a selected date. 1. 2. 3. 4. 5. 6. Select a date to search for video recording from the calendar. Choose a search type. Check channels you would like to search, or check Channel to search all connected channels. The search result will display on the timeline from 00:00 to 24:00. Click button to start playback. Control the playback with buttons on Video Playback Controls. 7.
USER MANUAL 6. Press and hold the left button of your mouse, and drag the drag the cursor to the timeline where you want to end the video clip. 7. The icon has been changed to icon, click to save the video clip. 8. Select a file type for your backup files, click Save button to save the video clips. Please make sure your USB driver has enough space to save the video clips. 9. The backup drive menu appears. Navigate to the folder you want the backup files to save in. 10. Click OK to begin.
USER MANUAL 6.1.2 Event Search, Playback & Backup Event search lets you view a list of video recordings with the channel, start and end time, and recording type conveniently summarized. You can also quickly back up events to a USB flash drive. 1 2 3 5 4 6 8 9 11 10 7 To search, play & back up for events: 1. Choose the date & time you want to search. 2. Check the recording types you want to search, or check Search Type to choose all. 3.
USER MANUAL Detailed view. You can view the details of the events. In the detailed view mode, you can lock the video events to keep events from being overwritten in the hard drive. Click the icon to lock or click to unlock the events. 8. When you click the left button of your mouse upon one of the event, system will show the event information on the left bottom corner of the screen. 9.
USER MANUAL 6.1.2.1 Event Playback Control 1 2 3 5 4 1. Event List, you can select the events here. 2. Click icon to save your selected event videos to USB flash drive. Click icon to play video. 3. Control the playback with buttons on Video Playback Controls. You can click icon or click right button of your mouse to exit the playback and return to event search window. 4. The event you are playing now will be displayed on the timeline. 5.
USER MANUAL 1 2 3 4 6 8 5 7 To search & play video in sub-periods: 1. Choose the date & time you want to search. 2. Choose the split-screens you want the videos to be played in. 3. Check the recording types you want to search, or check Search Type to choose all. 4. Choose the channels you want to search. Please note that this function only supports to search & play one channel at a time. 5. Click the play button to start playing. Control the playback with buttons on Video Playback Controls. 6.
USER MANUAL 6.1.4 Picture Search & View This function can be used to search, play and copy snapshots to a USB flash drive. 1 2 5 3 4 8 6 9 11 10 7 To search, play & back up pictures: 1. Choose the date & time you want to search. 2. Check the picture capture types you want to search, or check Search Type to choose all. 3. Choose the channels you want to search, or check Channel to choose all channels. 4. Click button to start search. 5.
USER MANUAL 8. When you click the left button of your mouse upon one of the pictures, system will show the picture information on the left bottom corner of the screen. 9. Check the box next the number of the event to select files, or check the box next Select to select all pictures in the page. 10. The number of selected files, total size information will be displayed at the right bottom of the screen. 11. After selecting file, you can click button to save the pictures to USB flash drive.
USER MANUAL Chapter 7 Remote Access via Web Client Use the Web Client to remotely access your WIRELESS NVR at any time via a PC. Before you access the Web Client, you need to ensure that the network settings of the WIRELESS NVR are configured properly. The most convenient and easiest way is if you have set the WIRELESS NVR a static IP address (please see “5.5.1 Network”). It means you only need to open the web browser on your PC and type in the static IP address you have set on the WIRELESS NVR.
USER MANUAL 7.1 Web Plugin Download and Installation To access the Web Client, do the following: For IE/Chrome/Firefox: 1) Launch the explorer on your PC and enter the WIRELESS NVR static IP address or DDNS domain name (Host Name) you have set on WIRELESS NVR in the URL box. 2) For the first time you run the web client, system will require to install the web client plugin. Click download to download the plugin and install to your computer.
USER MANUAL 3) After installing the plug-in, close & launch again your browser and repeat step 1 to open the login page. Input your user name and password to login the web client. Note: If you use Google Chrome, please use Version V41 or below. If you use V42 to V44, you need to enable NPAPI plugins. Please enter chrome://flags/#enable-npapi on URL bar to find and enable NPAPI. It doesn’t support V45 or above so far.
USER MANUAL For Mac SAFARI: 1) Launch the Safari on your Mac, and enter the WIRELESS NVR static IP address or DDNS domain name (Host Name) you have set on WIRELESS NVR in the URL box. 2) Download the plug-in "SurveillanceClient.dmg", locate the downloaded file and double click it. 3) Click on "Continue" --> "Install". Enter user name and password for Mac computer, Click on "Install Software" --> "Close" to finish installation. 2 1 3 4 1) Close SAFARI repeat step 1 to open the Web Client login page.
USER MANUAL 7.2 Web Client Manager The web client supports to full control the WIRELESS NVR with administrator account. Please make sure to protect your user name & password for preventing illegal login. 7.2.1 Live Interface This is the first screen that opens after you have logged in to the Web Client. Here you can open or close live preview, record video to local computer manually, take snapshots of the screens, color adjustment, etc. 1.
USER MANUAL : Stretch. : Original proportions. : Click to maximize the current window to full screen. Right click to popup menu option and select Exit Full Screen. 2.
USER MANUAL 7.3.2 Playback You can search & play recorded files stored on the HDD inside the WIRELESS NVR, and save the result to the local directory on your PC. Click to enter into Playback interface to remotely view the records in WIRELESS NVR HDD. It supports 1 to 4 channel record playback.
USER MANUAL 1. Record Search Record playback procedure Firstly, select the date you want to check and tick 1 to 4 channels. Any record files in current channel at current date will be displayed in the status bar of the interface. Secondly, select record type (Normal record, Motion record) and channels, and then click “ ”, and time axis panel will display specific time quantum.
USER MANUAL 2. Playback Control Playback control bar.
USER MANUAL Record file download Click download icon “ ” on the control bar to display all the matched record file according to the search conditions of channels. Tick-select the record file you want to download and click [Start download] .System will download the record file in sequence and save to local PC. The downloading file will be displayed in percentage form. After downloading finishes, “Complete” will be displayed on the status bar.
USER MANUAL 7.3.3 Local Setting Record Path: Set the path to save manual recordings on your PC’s local drive. Download Path: Set the path on your PC’s local drive where you want to download recordings from the WIRELESS NVR. Snapshot Path: Set the path to save manual snapshots on your PC’s local drive. Save: Click Save to save the modifications. File Type: Choose your preferred file type for manual recordings. Interval: Determine the maximum length of manual recordings.
USER MANUAL Chapter 8 Appendix 8.1 Troubleshooting 1. Q: What can I do if the system does not detect the HDD? A: Check if the power supply system is properly connected and data cord and power cables are securely connected, and if something wrong with the HDD interface. Or you may check if your HDD is supported by referring to the specifications or descriptions. 2.
USER MANUAL 12. Q: Why doesn’t dynamic detection work? A: Please check if the motion detection time and motion detection regional setting are correct and if the sensitivity is set too low. 13. Q: Why doesn’t alarm work? A: Please check if the alarm setting, alarm connection and alarm input signals are correct. 14. Q: Why does buzzer keep alarming? A: Please check the alarm setting, check if motion detection function is enabled and object motion is detected all the time is set as Always Off.
USER MANUAL 8.
USER MANUAL FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
USER MANUAL The m a t e r ia l in t h is docum ent is th e in te lle c tu a l p ro p e rty of our departm en t . p art of th is t ra n s m it te d , No or p u b lis h e d departm en t m anual in m ay any be rep ro d u ced , fo rm or by any c o p ie d , m eans t ra n s la te d , w ith o u t our p r io r w r itt e n p e rm is s io n .
