User's Manual

USER MANUAL

5.5.3 Cloud

This menu allows configuration to see what is happening on your cameras anytime. You can

upload the captured pictures to Dropbox in real time, or when motion detection happens.

Cloud Storage: Enable to allow cloud settings

Cloud Type: Only Dropbox cloud storage is supported currently

Channel: Select the channels where you want to upload the snapshots to Dropbox

Alarm Detection: Enable if you want to upload snapshots to Dropbox when the camera detects a

motion

Drive Name: Enter the cloud storage name for your WIRELESS NVR

Activate Cloud: Click to activate the function. An activation email will be sent to the receiver’s

email account

Process to start uploading the snapshots

1) To use cloud backup, you need to register your email first. For details,

please refer to page 35.

2) Register an account on https://www.dropbox.com/.

3) Configure your network to ensure your recorder is on the network.

4) Configure Cloud: Enable Cloud and set the channel. Enable Motion Detection

to have it capture pictures when motion detection happens.

5) Driver Name refers to the name created in the Dropbox folder and the

name can be defined by the user, e.g. 1080P-SNW204. The folder is to store

captured pictures from the DVR.

6) Click [Activate Cloud] to activate Cloud and Email for the user verification will

be sent. Click the link in the email and then log in to your dropbox account, and

click permit. DVR cloud storage function will be activated. If you have logged