CDA-SDI400 3G-SDI 1 by 4 Splitter Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Comprehensive assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Comprehensive assumes no responsibility for any inaccuracies that may be contained in this document. Comprehensive also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction .................................... 1 2. Applications .................................. 1 3. Package Contents ......................... 1 4. System Requirements ...................... 1 5. Features........................................... 1 6. Operation Controls and Functions .. 2 6.1 Front Panel ......................... 2 6.2 Rear Panel .......................... 2 7. Connection Diagram ................... 3 8. Specifications .............................. 4 9. Acronyms ......
1. INTRODUCTION The 3G-SDI 1 by 4 Splitter allows SD-SDI, HD-SDI and 3G-SDI signals to be split from a single SDI source to up four simultaneous SDI outputs while ensuring high bit rates of 2.970 Gbit/s to give you high bandwidth signal transmission without signal loss over long distances. 2. APPLICATIONS • Video broadcasting display • Professional video program display • Film studios program monitoring • Video program switching display 3. PACKAGE CONTENTS • 3G-SDI 1 by 4 Splitter • 5 V/2.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel POWER SDI OUTPUT CSDI-14 3G SDI 1x4 Splitter 1 2 1 Power LED The LED will illuminate green when the device is connected to a power supply. 2 SDI OUTPUT Connect to up to four SDI TVs or monitors for simultaneous display or to another splitter to cascade the SDI signal to multiple displays or devices. 6.2 Rear Panel SDI INPUT 1 DC 5V 2 1 SDI INPUT Connect to the SDI output of the SDI source device such as a video camcorder or SDI player.
7.
8. SPECIFICATIONS SMPTE Standard 425M Level A & B, 424M, 292M, 259M-C SDI Transmission Rates 2.970 Gbit/s and 2.970/1.001 Gbit/s Input 1×BNC (SD/HD/3G-SDI) Output 4×BNC (SD/HD/3G-SDI) SDI Timing Support SD-SDI: SMPTE 259M-C, 270 Mbit/s HD-SDI: SMPTE 292M, 1.485 & 1.485/1.001 Gbit/s 3G-SDI: SMPTE 424M/425M-AB, 2.970 & 2.970/1.001 Gbit/s Power Supply 5 V DC/ 2.
9. ACRONYMS ACRONYM COMPLETE TERM 3G Bandwidth 2.
Comprehensive Connectivity The Pro’s Connectivity Since 1974 80 Little Falls Rd, Fairfield NJ 07004 Phone: 1-800-526-0242 www.comprehensiveco.com sales@comprehensiveco.