USER MANUAL Models: CDA-SV20, 1:2 s-Video DA CDA-V20, 1:2 Video DA For maximum results, use Comprehensive Brand Premium High Resolution cables and connectors.
Contents 1 2 3 4 4.1 4.2 5 5.1 5.
1 Introduction Congratulations on purchasing your CDA-SV20 1:2 s-Video DA and/or CDA-V20 1:2 Video DA.
.1 Your CDA-SV20 1:2 s-Video DA The CDA-SV20 1:2 s-Video DA is a micro-sized high performance 1:2 distribution amplifier for s-Video (Y/C) signals.
4.2 Your CDA-V20 1:2 Video DA The CDA-V20 1:2 Video DA is a micro-sized high performance 1:2 distribution amplifier for composite video signals. The CDA-V20: Accepts a single input and distributes it to 2 identical outputs using BNC connectors Has a bandwidth of 470MHz, ensuring that it remains transparent even in the most critical applications Has gain and equalization (EQ.
5 Connecting the CDA-SV20 and CDA-V20 This section describes how to connect the: CDA-SV20 1:2 s-Video DA, see section 5.1 CDA-V20 1:2 Video DA, see section 5.2 5.1 Connecting the CDA-SV20 1:2 s-Video DA To connect the CDA-SV20 1:2 s-Video DA, as the example in Figure 3 illustrates, connect the following1: 1. Connect an s-Video source (for example, an s-Video player) to the INPUT 4p connector. 2.
5.2 Connecting the CDA-V20 1:2 Video DA To connect the CDA-V20 1:2 Video DA, as the example in Figure 4 illustrates, connect the following1: 1. Connect a composite video source (for example, a VCR) to the INPUT BNC connector. 2. Connect the 2 OUT BNC connectors to up to 2 composite video acceptors, as follows: Connect the OUT 1 connector to video acceptor 1 (for example, a projector) Connect the OUT 2 connector to video acceptor 2 (for example, a monitor) 3.
6 Technical Specifications 1 Table 3: Technical Specifications of the CDA-SV20 / CDA-V20 INPUTS: CDA-SV20 CDA-V20 1 s-Video, 1Vpp /75 (Y), 0.3Vpp /75 (C), on a 4p connector 1 Video, 1Vpp /75 connector OUTPUTS: on a BNC 2 s-Video, 1Vpp /75 (Y), 0.3Vpp /75 2 Video, 1Vpp /75 on BNC (C), on 4p connectors connectors MAX. OUTPUT LEVEL: 2 Vpp 2 Vpp BANDWIDTH (-3dB): 150MHz 470MHz DIFF. GAIN: < 0.03% 0.05% DIFF. PHASE: 0.03 Deg. 0.05 Deg. K-FACTOR: <0.05% <0.05% S/N RATIO: 78dB 76dB CONTROLS: Gain: -1.
