Instruction Manual CSW-HDMI210 & CSW-HDMI410 HDMI Switchers
Table of Contents 1.0 Introduction 4 2.0 Specifications 5 3.0 Checking Package Contents 6 4.0 Connecting The Hardware 7 5.0 Operating The Unit 7 6.0 Installation of Mounting Components 8 7.0 Troubleshooting 9 8.0 Limited Warranty 9 9.0 Regulatory Compliance 10 10.
1.0 INTRODUCTION Thanks for purchasing this CSW-HDMI210 or CSW-HDMI410 HDMI Switcher from Comprehensive. These HDMI Switchers are designed to provide a way to select and switch up to 4 HDMI inputs without signal degradation or loss of encryption. 1.1 Liability Statement Every effort has been made to ensure that this product is free of errors. Comprehensive cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use.
2.
3.0 CHECKING PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make certain the following items are contained in the shipping carton: • • • • • 1 ea HDMI Switcher 1 ea 5 VDC Power Adapter 1 ea IR Remote Control 1 ea Remote Mounting Kit 1 ea Instruction Manual Note: Please retain the original packing material should the need ever arise to return the unit. If you find any items are missing, contact your reseller or Comprehensive immediately.
4.0 CONNECTING THE HARDWARE For reference purposes, the units are depicted below in relative scale. Please study the drawings below and become familiar with the location of the controls, status LEDs, signal inputs, signal output and the power input. Connect an HDMI approved cable, no more than 50 feet in length, from each of the HDMI sources to the inputs of the switcher. Next, connect the output of the switcher to the destination device using an HDMI approved cable no more than 50 feet long*.
provided. In the case of the remote, there are separate buttons for the power and input sources. Point the remote control at the unit and press the power button to turn the switcher on or off. Press the appropriate input select button to cause the desired input to appear on the switcher’s output. 5.
7.0 TROUBLESHOOTING In the event of problems, first make certain that the input and output cables are no more than 50 feet long (for signals to 1080i resolution) and are of the highest possible quality. Next, make certain that the Switcher is receiving power. If all is well in these areas, remember that HDMI devices communicate with one another so the source devices and destination device must be fully HDMI capable.
9.0 REGULATORY COMPLIANCE The Comprehensive CSW series HDMI Switchers have been tested for compliance with appropriate FCC and CE rules and regulations and are also RoHS compliant. The Power Adaptor/Supplies have been tested for compliance with UL, CE, CEC and CSA rules and regulations and are also RoHS compliant. 10.
4X1 Commands: Command Code 0x01 0x02 0x03 0x04 0x05 Description Port 1 On Port 2 On Port 3 On Port 4 On Power On/Off 11
Comprehensive 55 Ruta Court South Hackensack, NJ 07606 Phone: 800-526-0242 Fax: 201-814-0510
