Service manual

S-6
02/2008
SECTION I: VENDOR INSTALLATION (CONTINUED)
H. Door Support (Figure 2)
The door support is to ensure that the
outer door closes squarely to the cabinet.
Raising the door can also ensure proper
alignment of the door latch.
FIGURE 2
I. Door Latch Alignment (Figure 3)
After any door adjustment, the oating quicker lock
assembly should align itself automatically. The latch
assembly is adjustable. To adjust, loosen the latch
bracket mounting screws, raise or lower the latch
assembly into position, then tighten the mounting
screws.
FIGURE 3
WARNING:
KEEP FINGERS AND OTHER OBJECTS OUT OF LOCK CAVITY
NOTE: Refer to the appropriate parts and service manual for detailed
instructions, operating principles, and recommended maintenance intervals and
procedures.