Service manual

P-9
06/2005
SET-UP AND CODE DESCRIPTION (CONTINUED)
Closed Door Data Retrieval Mode
If selection button two is pressed at the “ ” prompt, the controller will enter the Closed
Door Data Retrieval Mode by displaying “
” where “ ” is the password. Pressing
selection button number one while the digits are ashing will change the current password.
The available digits are 0-6. (See note below.) Pressing selection button two will save the
change and advance to the next digit. In order to save the password and exit the mode,
press selection button two while the last/fourth digit is ashing.
Note: If one of the digits in the password is “0” this feature will be disabled since selection
button “0” does not exist.
Note: This feature is not available when the vend price is set to “0.00”.
Language Mode
If selection button two is pressed at the “
” prompt, the controller will enter the Language
Mode by displaying the currently assigned language. The available languages are –
English,
– French, – German, – Italian, – Portuguese, and – Spanish.
Pressing selection button one will toggle though the language options. If selection button
two is pressed, the display will save the language change and return the display to
.
Clock Setting Mode
If selection button two is pressed at the “ ” prompt, the controller will enter the Clock
Mode which allows you to set the clock on the control board. This eld must be set in order
to operate any modes associated with the time. Pressing selection button two while any of
the options are displayed will enter you in to the clock setting options. Pressing selection
button one will toggle you through the options. Pressing selection button three will exit this
mode.
CLOCK SETTING OPTIONS
Current Year (Example: 2002)
Current Date (month, day)
Current Time (hours, minutes)
Daylight Savings Time
Clock Control