Service manual

P-12
06/2005
Block Selection Setting
This feature is used to choose a group of selections and the time when those selections will
be blocked from vending product. If selection button two is pressed at the “ ” or “ ”
prompt, the controller will enter the Selection Blocking Control Mode. Upon entry into this
program, the display will show the rst sub-mode “ ” or “ ” depending on which block-
ing mode you are using. Using selection button one will let the operator toggle between the
following modes:
REFRIGERATION CONTROL SETTINGS
Refrigeration control enabled (1)/disabled (0)
Start Time – Time temperature rises 18°F/10°C
Days associated with start time
Hour associated with start time
End Time – Time temperature returns
Days associated with end time
Hour associated with end time
2
nd
Start time – Time temperature rises 18°F/10°C
Days associated with 2
nd
start time
Hour associated with 2
nd
start time
2
nd
End Time – Time temperature returns
Days associated with 2
nd
end time
Hour associated with 2
nd
end time
“ ” – Monday
“ – Tuesday
“ ” – Wednesday
“ ” – Thursday
“ ” – Friday
“ ” – Saturday
“ ” – Sunday
“ ” – All Days
SET-UP AND CODE DESCRIPTION (CONTINUED)