User's Manual

9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L
6
Monitoring and Control
The monitoring and control function is possible by connecting the BDA through a serial RS232 connector. A
Serial to USB cable is available under request.
The software designed for this purpose is provided (ver 1.02). This software should be installed on a computer
with Windows, XP,Vista,7, 8 or 10 versions. When you run the software you will see the screen shown below.
To activate the control you should first click on “Release”. If the HPA enable is in the “Off” position you
should click it to turn it “ON” in order to have the amplifier start working.
4. Monitor, Alarm, and Control items
4.1 Monitor:
1) Downlink Input Power. This gives the power level in dBm of the signal coming from the BTS
The lowest level the unit can detect is -76 dBm.
2) Downlink / Uplink Output Power
3) Downlink / Uplink System Gain