User's Guide

True Wireless Stereo Earbuds With Touch Control

Model: CCS15156

Packaging Contents:

 1 pair of Wireless Earbuds

 1 Charging Case

 3 pairs earbuds caps (1 pair pre-assembled on earbuds)

 1× Type-C Charging Cable

 1× User Guide

How to Use:

1. Charge Your Wireless Earbuds

1.) Prior to use, charge your wireless earbuds

Use the supplied Type-C charging cable, plug the cable into the Type-C port which is

located on the back of the charging case.

2.) Charging case charging: the blue LED is flash.

Charging case full charged: solid blue

Charging case

Blue LED

2. Selecting the Right Fit

Your wireless earbuds include three sizes of earbud caps. They are pre-assembled with medium size earbud caps.

Determine which ones provide the best fit to achieve the optimal listening experience.

If the medium size earbud caps do not feel comfortable, pull them off and replace with another

size.

Small and Large earbud caps

Type- C

Charging cable

PAGE 1
True Wireless Stereo Earbuds With Touch Control Model: CCS15156 Packaging Contents:  1 pair of Wireless Earbuds  1 Charging Case  3 pairs earbuds caps (1 pair pre-assembled on earbuds)  1× Type-C Charging Cable  1× User Guide How to Use: 1. Charge Your Wireless Earbuds 1.) Prior to use, charge your wireless earbuds Use the supplied Type-C charging cable, plug the cable into the Type-C port which is located on the back of the charging case. 2.) Charging case charging: the blue LED is flash.
PAGE 2
3. Pairing Your Device 1.) Place the earbuds near the Bluetooth-enabled device (within 3 feet / 1 meter ). 2.) Remove both earbuds from the charging case and place into your ears. 3.) The earbud is called”CCS15156” and choose the device. 4.) When your device is connected and the pairing is completed, the blue LED light will turn off. Notes: To shut down, touch the Multifunction Button for 4 seconds or place back into the charging case. Once paired, the range is approximately 32 feet/10 meters.
PAGE 3
Troubleshooting If your wireless earbuds are not pairing together OR if both earbuds are not flashing blue, use the following instructions to reset and re-pair your earbuds: 5.) Remove both earbuds from the charging case and turn them OFF by touching both earbuds simultaneously until the blue lights slow flashes 3 times. Please note, do not cover entire earbuds with your finger or you will not see the blue light flash. 6.