User's Manual

3. Select CCS15167 from the list of found devices.
4. When paired, the LED blue light slow flashing after the red and
blue alternately flashing.
5. When power off, press and hold the "function button" for 5
seconds, see the red and blue lights flashing alternately and then
release your mobile device to search for the Bluetooth headset,
then click connect and public version of the female voice "power
on".
6. When power on, press and hold the Volume Up/Down key for
about 5 seconds to clear pairing and re-enter pairing mode with
voice of ‘Di’.
7. When the power is on, it can automatically connect back, and
when the connection distance is exceeded, it will automatically
connect back to the effective distance range, and you can hear
the public version of the female voice prompting "connected or
disconnect".
Note:
 During pairing, if the headphones are not connected to a device
within 10 minutes, they automatically turn off.
 When successfully paired, your headphones automatically
reconnects to the most recently paired device when switched on.
 When the volume is increased to the maximum minimum, there is
an alarm sound.