Owner`s manual

4
MintBox 2 features
Front panel
The features of the front panel of MintBox 2 depend on specific FACE Module used and are documented
separately.
Power
MintBox 2 has a tactile power push-button. It is used for turning on/off the PC and for standby/resume
when supported by the operating system.
A push of at least 5 seconds will always turn off the MintBox 2.
Display
MintBox 2 has dual display interface with support for dual head.
1. Standard HDMI with audio support
2. DisplayPort
To connect MintBox 2 to a DVI display, use the provided HDMI to DVI-D adapter. Use a DVI cable to connect
the adapter to the display.
To connect MintBox 2 to a VGA display use fit-VGA (sold separately).
Audio
There are 2 standard 3.5mm jacks on the back panel.
Right:
 Stereo line-in using a standard 3.5mm plug
 S/PDIF 7.1 in using provided cable
Left:
 Stereo line-out using a standard 3.5mm plug
 S/PDIF 7.1 out using provided cable
LAN
MintBox 2 features two 10/100/1000BaseT Ethernet ports using standard RJ45 connectors. Use a standard
Ethernet cables to connect.
The connectors feature built-in LEDs that are lit when a connection is detected.