Owner`s manual

6
Quick start guide
Connecting MintBox 2
 Turn off the display and connect it to the MintBox 2 HDMI connector (use the HDMI to DVI
adapter if needed).
 Connect the USB keyboard and mouse to USB 2 connectors.
 Plug the Ethernet cable into the Ethernet connector.
 In MintBox 2 models with WiFi: Mount the WiFi Antennas on the SMA connector by turning it
clockwise repeatedly until the antenna holds firm.
 Insert the DC plug into the MintBox 2 DC-in jack. Rotate clockwise 90
0
to secure.
 Plug the speakers into the line-out jack.
 Connect the power supply to the AC cord and plug the cord into AC outlet. The front panel logo
should light up as the MintBox 2 boots.
Booting Linux
Linux loads automatically on power up. Upon boot you will be guided through the Linux Mint first-boot
setup procedure.