User's Manual

Tablet Blue TW 10 Series

Bogotá Colombia 16

2- Use a damp, or cleaning cloth, soft, lint-free cloth with gentle

water only and gently wipe the screen surface.

3- Do not spray liquid directly on the screen.

ENERGY SAVER MODES

This section contains information about computer power system, including

the AC Adapter, the battery system, recharging the battery, and tips for

conserving battery power.

The feed system consists of two parts, the AC Adapter and the battery

system. The AC Adapter converts AC power from a wall outlet to the DC

power required by the computer.

Currently, virtually all Tablets incorporate a power-saving mode. To achieve

the reduction of energy consumption in tablets, we have established two

operation modes, Sleep and Standby, which must be incorporated as

required practices in public offices. Then these concepts defined.

Standby Mode.

The system automatically enters this mode after a period of inactivity, which

is set in the dialog box Power System. In standby mode, hardware devices,

such as display panel and hard disk, are turned off to conserve power.

Inactivity.

Defined as the time period in which the computer or monitor receives no

input signal activation. In the computer these signals are given by peripheral

input device, for example, keyboard, mouse movements, etc.)

Hibernate Suspend.

In this mode, all system data are saved on the hard disk before powering

down. When this mode is activated, all system state and contents are saved

to the hard drive after a period of inactivity defined by the user.

No power or very little power is drawn from the battery module in this mode.