created by: Impala Services Ltd. Page size: 139.7 x 107.95 mm Wi-Fi 11N USB Adapter, Black, 300 Mbps Adaptateur USB Wifi 11 N, Noir, 300 Mbps Wi-Fi 11N USB-Adapter, Schwarz, 300 Mbps Adattattore USB Wi-Fi 11N, Nero, 300 Mbps Adaptador USB Wi-Fi 11N, Negro, 300 Mbps Wi-fi 11N USB アダプター、黒、 300メガバイト 11无线 USB 适配器，黑色，300 Mbps B071Y6Y83W Y6Y83W-Amazonbasics-Wi-Fi 11n 300 Mbps USB Adapter-Detailed-V03.
Welcome Guide • English Wi-Fi 11N USB Adapter, Black, 300 Mbps Contents: Before getting started, ensure the package contains the following components: 1 USB plug 2 WPS button 3 LED indicator 4 Antenna connection 5 Antenna 6 Software CD 5 4 2 3 1 6 Y6Y83W-Amazonbasics-Wi-Fi 11n 300 Mbps USB Adapter-Detailed-V03.
USA: Federal Communications Commission (FCC) Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Low Voltage Directive (2014/35/EU) • EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013 The Radio Equipment Directive (2014/53/EU): • ETSI EN 300 328 V2.1.1(2016-11) • ETSI EN 301 489-1 V2.2.0(2017-03)/ETSI EN 301 489-17 V3.2.0(2017-03)SI EN301 908-13 V11.1.1(2016-07) Introduction Thank you for purchasing the Wi-Fi 11N USB Adapter, Black, 300 Mbps. This wireless adapter is easy to use and easy to setup.
Installing Driver And Utility On MacOS D Click "Continue" and follow the on-screen instructions. Connecting the Antenna Mount the antenna to the USB adapter by screwing it on the antenna connection. Installing Software Utility Note 1: The installation was carried out on a machine running MacOS Sierra 10.12.6. Note 2: If you have installed the WLAN Adapter driver & utility before, please uninstall the previous version first. A B C Insert the software CD to the CD-ROM Drive.
F After the installation is complete, the computer needs to restart. Click “Continue installation”. Network Connection Connecting to the Network • After the installation is completed, a Wireless Configuration Utility icon taskbar. • Right click icon and click “Turn USB-WiFi On”. G appears on the After the installation is complete, click “Restart”. • The icon appears on the taskbar. • Click on the icon and choose the Wi-Fi network you want to connect to.
Joining Other Network Turning the Wi-Fi Off • If the desired Wi-Fi network is not on the list, click “Join Other Network”. Enter the name of the network and choose security type. Click “Join”. • To turn off the Wi-Fi reception, click and then . Disconnecting From The Network • To disconnect from the Wi-Fi network, click want to disconnect from. and then next to the Wi-Fi network you WPS (Wi-Fi Protected Setup) • Click and then . • PIN number appears in the PIN section.
PIN Method • PIN method is a connection method, where PIN code must be entered at the network’s access point. • Click to scan active WPS AP with the PIN method. • Enter the PIN code at the network’s access point. Wireless Utility Opening Wireless Utility • Click and then . Push Button Configuration (PBC) • PBC is a connection method, in which the user has to push a button on both the access point and the new wireless client device.
Installing Driver And Utility On Windows Connecting The Antenna D2 REALTEK USB Wireless LAN Software window shows the installation is complete. Click on “Finish”. Mount the antenna to the USB adapter by screwing it on the antenna connection. Installing Software Utility A The following installation was done under Windows 10 x 64 operating system. NOTICE: If the desired network is not on the list, click “Refresh”. B C D Plug in the adapter into the USB 2.0 port. Open the “Setup.exe” file.
Network Connection • Click on “Available Network”. The list of currently available networks is shown in the window. Connecting To The Network • After the installation is completed, a REALTEK USB Wireless LAN Utility icon on the desktop. • Plug in the adapter into the USB 2.0 port. • After plugging in, the blue LED indicator on the adapter flashes. • Double click on the REALTEK USB Wireless LAN Utility icon. appears NOTICE: If the desired network is not on the list, click “Refresh”.
General Profile In the “General” section, you can find the following information: After connecting to the network, it will be added to the Profile section.
Available Network Status This section allows you to see/connect to the available networks. This section allows you to see the network connection status detailed information Statistics This section presents the network connection statistics. To reset the statistics press X • Double click on the particular network to enter the Wireless Network Properties window. 22 B071Y6Y83W-Amazonbasics-Wi-Fi 11n 300 Mbps USB Adapter-Detailed-V03.
Wi-Fi Protected Setup Wi-Fi Protected Setup (WPS) section allows to connect to the Wi-Fi network’s access point by: • Pin Input Config (PIN) Connection method, where a PIN code must be entered at the network's access point. • Push Button Config (PBC) Software AP Connection General Tab The Wi-Fi adapter can also be used as a software AP. Click “Mode(M)” and then “Access Point”. It can take up to few minutes to switch from the “Station” to the “Access Point” mode.
Advanced Tab AP Statistics Tab This tab gives you information about the data transmission and receiving status. Click “Reset” to restart the counting. • Beacon interval Beacon Interval specifies the interval between beacon packets (milliseconds). The range for the beacon period is between 20-1000 milliseconds with a typical value of 100. • DTIM period Determines the interval at which the Access Point will send its broadcast traffic. Default value is 3 beacons.
Internet Connection Sharing (Ics) Internet Connection Sharing (ICS) is the use of the 3G cellular service, broadband network or other Internet gateway as an access point for other devices. If you want to connect to the internet through Soft_AP, select the network connection and press the “Apply” button. Your internet connection is then internally shared with the Soft_AP, other devices can be connected to the (AP) access point and then get access to the internet.
Disclaimers THESE MATERIALS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. We uses reasonable efforts to include accurate and up-to-date information on this document; it does not, however, make any representations as to its accuracy or completeness of the information, text, graphics, links or other items contained within these materials.
amazon.com/AmazonBasics MADE IN CHINA Y6Y83W-Amazonbasics-Wi-Fi 11n 300 Mbps USB Adapter-Detailed-V03.
