User's Manual

2726
Advanced Tab
• Beacon interval Beacon Interval specifies the interval between beacon packets
(milliseconds). The range for the beacon period is between 20-1000
milliseconds with a typical value of 100.
• DTIM period Determines the interval at which the Access Point will send its broadcast
traffic. Default value is 3 beacons.
• Preamble mode
The preamble defines the length of the CRC block for communication
among the wireless stations. There are two mode including Long and Short.
High network traffic areas should use the shorter preamble type.
• Set defaults Set the settings to default.
• Apply Confirm the changes
AP Statistics Tab
This tab gives you information about the data transmission and receiving status. Click “Reset” to
restart the counting.
• Beacon interval Beacon Interval specifies the duration between beacon packets (milliseconds).
The range for the beacon period is between 20-1000 milliseconds with a
typical value of 100.
• DTIM period Determines the interval that the Access Point will send its broadcast traffic.
Default value is 3 beacons.
• Preamble mode
The preamble defines the length of the CRC block for communication among
the wireless stations. There are two mode including Long and Short. High
network traffic areas should use the shorter preamble type.
• Set defaults Set the settings to default.
• Apply Confirm the changes
Soft AP Statistics AP
Here you can find real time information about the data transmission and receiving status. Click
“Reset” to restart the counting.
B071Y6Y83W-Amazonbasics-Wi-Fi 11n 300 Mbps USB Adapter-Detailed-V03.indb 26-27 17/10/2017 2:13 PM