User's Manual

The following diagram shows a typical user installation.
In this example the charging dock is connected to the audio output of a TV and the audio inp ut of a stereo system (optional). This
optional connection is helpful if your audio source component only has one audio output and you want to connect is to both the
charging dock and another component, like a stereo system.
Note:
If your audio device does not have RCA outputs, you can use the 3.5 mm‐to‐RCA adapter (included) to make the connection
Your setup may differ from the example shown here.
1) Connect the AC adapter connector to the charging dock’s DC 5V jack.
2) Connect the AC adapter plug to an AC power outlet.
3) Turn the ON/OFF switch o n the back of the charging dock to “ON”. The PAIRING indicator begins to blink (Blue).
Note:
1) To avoid risk of fire and to prevent damage, on ly use the AC adapter supplied with your wireless RF headphones. Make sure that the AC
power outlet matches the AC adapter’s 100‐240V before making the connection.
2) Plug the AC adapter into the power outlet only after all other connections are completed.
Setting your system
Step 1:
Connecting the headphones
Step 2:
Connecting the RCA adapter to the charging dock