User's Manual

1. Slide the OFF/ON switch on the charging dock to ON.

2. Place the headphones onto the charging dock. Make sure that the headphone charging contacts and the dock charging pins

make contact when you pu t the headphones in the charging dock.

3. The docking station Charging indicator turns red to indicate the headphones are charging.

4. When the headphones are fully charged, the docking station Charging indicator turns green.

5. When the headphone battery charge is low, the Power/Pairing indicator on the headphones blinks red. The Power/Pairing

indicator on the headphones turns red 30 minutes prior to the battery being exhausted.

Turning on the system:

1. Slide the OFF/ON switch on the charging dock to ON. The Pairing indictor on charging dock blue blink.

2. Slide the power switch on the right earpiece to turn ON the headphones. The Power/Pairing indictors on the headphones

blue blink.

3. When the Power/Pairing indictors on the headphones and Pairing indictors on charging dock both light steadily blue, an

Actively link is established between headphone and docking station. The system is now to and ready to be used.

Notes: Auto‐pairing takes 5‐10 seconds.

1. Turn to the headphones and charging dock. Make sure that your charging dock and headphones are wirelessly paired.

2. Set the headphone volume level to the minimu m.

3. Put your headphones on your head. Adjust the fit until you feel comfortable.

4. Turn on your audio source and begin playback. Depending on the audio source, you may need to turn up the volume on the

audio source.

5. Adjust the headphone volume to your normal listening level.

1. Press the power button on the right earpiece to turn OFF the headphones.

2. Slide the OFF/ON switch on the charging dock to OFF to turn off the system.

Using your system

Step 1:

Charging the headphones

Step 4:

Listening to your Wireless RF headphones

Step 2:

Using the headphones

Turning off the system