.0 channel Bluetooth sound bar Remote control 2 AAA Power adapter Stereo 3.
tem Description LED indicator Indicates when tastings are charged on the sound bar Lighted carol when the Sound ber Is standby Lights bite color when tum on the sound bar Rawer button Press to tum on the sound ber.
If the TV, or other aide source advice, has AUX out jack, connect the AUX cable to the sours devices and this Jack Remote Control 2 tem Description 1 Power bunion Press to um on the sound ber.
5 Paralyses button | Press to play or pause 6 Next button Press to sip to the next track a] 7 Volume —bunion | Press to decrease the volume Press to select Standard Digital Signal Processor {DSP) sound mods. Press to cassia news Digits Signal Processor {DSP) sound mess.
Using the remote control 1.Remove the plastic battery cover by gently sliding it away from the remote 2.Insert the batteries and gently slide the battery cover back Into place 3.Painted the remote control directly at the IR sensor on the front of the sound bar Setting up your sound bar First step — Choosing your connection 1.Look at the back of your sound bar source device, such as a TV, DVD, or cable box, to Identify your audio output ports 2.Choose one connection option that fits your audio devices.
Pairing your devices 1. Sslsct the Bluetooth as the input source by pressing the Bluetooth button JE on the remote control or the button on the sound ber. The blue Bluetooth indicator on the sound bar blinks quickly 2 Navigate to your device's Bluetooth setting, tum on Bluetooth, and then search for available device. For additional information on paring your device, refer to your devices’ documentation 3.
3 Press the source button on the sound bar repeatedly to select the audio source or press the selected source button on the remote control 4.Press the DSP button on the sound bar repeatedly to select your favorite sound performance or press the selected on your remote control. There are three DSP mode available as news, standard, and movie 5. Adjust the volume on your sound bar or the audio component to a comfortable level 6 Press the power bunion again to tum off your sound bar.
If you are using Bluetooth, tum up the, value on your Bluetooth device If you are using the AUX 3.5mm cable ‘connection, make sure that the volume is fumed up on your sound source If you ere using the optical connection, make sue the source device's audio source Ia set to “PCM" format.
3. Marla sure your device or sound ber Is not connected to another Bluetooth device 4. Mao sure that you have selected “Amazonbasics&® on your Bluetooth device FCC Naming: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.