Bluetooth Sound Bar with Built-in Subwoofer Model: SB210 Package Contents Bluetooth Sound Bar with Built-in Subwoofer Remote control 2 AAA batteries Power adaptor Stereo 3.5mm audio cable Stereo RCA audio cable Digital optical cable 2 x sound bar wall mount brackets Wall mount screws (3.
14 ○ Back View 16 ○ 17 ○ 18 ○ 15 ○ # Item Description 1 LED indicator Indicate when settings are charged on the sound bar Light red color when the Sound bar is standby Light ice blue color when turn on the sound bar 2 Power button Press to turn on the sound bar.
about 5 seconds) 10 Source button Press repeatedly to cycle through the available sound source: optical, RCA, and AUX 11 LED indicator Indicate when sound bar is connecting to RCA source 12 LED indicator Indicate when sound bar is connecting to AUX source 13 LED indicator Indicate when sound bar is connecting to optical source 14 LED indicator It blinks quickly when Bluetooth is paring.
# Item Description 1 Power button Press to turn on the sound bar.
(DSP) sound mode 9 News button Press to select news Digital Signal Processor (DSP) sound mode 10 Movie button Press to select movie Digital Signal Processor (DSP) sound mode 11 RCA button Press to select the RCA sound source for your sound bar 12 AUX button Press to select the AUX sound source for your sound bar 13 OPT button Press to select the optical sound source for your sound bar 14 Bluetooth button Press to enter the Bluetooth input (To enter force pairing mode, press and hold for ab
2. Change the device’s audio output to “PCM” format (typically found in audio settings). Refer to the documentation that came with your audio source device for more information RCA connection 1. Connect the connectors of the RCA audio cable to your sound bar 2. Connect the other end of the RCA audio cable into the audio output ports on your audio source device 3.5mm connection 1. Connect the connectors of the 3.5mm audio cable to your sound bar 2.
Reconnecting to a paired device When your sound bar is not paired to a device, the LED indicator turns off 1. Turn on your sound bar. Your sound bar searches for the last connected Bluetooth device and reconnects 2. When your Bluetooth device is within 30 feet of your sound bar, it will reconnect Positioning the sound bar 1. You can set the sound bar on the flat surface 2. You can mount the sound bar on the wall.
There is no power 1. Press the power button on the remote control or on the top of sound bar 2. Ensure the power cord is securely connected 3. Plug a different device into the electrical outlet to verify that the outlet is working correctly The remote control does not work 1. Remove any obstacles between the remote control and the IR sensor on the sound bar 2. The remote control battery may be exhausted, replace it. 3. Move close to the sound bar.
if the buzzing persists. If it does not, the problem may be with the original device 3. Connect your device to a different input on the sound bar 4. If you are using the optical connection, make sure the source device’s audio source is set to “PCM” format. Refer to the documentation you received with the audio source device such as TV, DVD for additional information 5. Make sure the audio cable you are using is not damaged or broken. Try using another one The Bluetooth device keeps unpairing 1.
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.
canadienne sur l'exposition et la conformité de rf.
