Instruction manual

NLQ (green)

Lights up when Near Letter Quality is selected using Font button.

Draft (green)

Lights up when Draft Quality is selected using Font button.

HSD speed is selected if LQ, NLQ and Draft light off.

Buttons

Ready button

When the READY indicator is lit, pressing this button causes the temporary

stop of the printing job at the end of the current line; the READY indicator is

turned off.

When the printing is paused pressing this button the printing will be enabled

and the READY indicator is turned on

Load/Eject button

Press this button to load paper. If paper has already been loaded, pressing this

button will eject the paper. If the cut sheet is selected using path selection lever,

the printer ejects the paper forward; otherwise if the continuous paper is

selected, the printer ejects the paper backward to the standby position.

LF/FF button

Feeds paper line by line when pressed shortly, ejects a single sheet or advances

continuous paper to the next top of form position when held down.

Shift button

Hold down this button while pressing another button at the same time, the

printer can accomplish the following functions: