User manual

Configuring the Printer
A78408098-005
22
Power-On Configuration
The default values of the various functions are indicated in bold.
Entering the Power-On Configuration
1. Make sure that the printer is turned off.
2. Press and hold the
PROGRAM
key pressed while powering on the printer until
the
RELEASE KEY
message is displayed. As soon as the
PROGRAM
key gets
released, the following message will be displayed:
9058
or
9058D
then,
The following figure shows the structure of the Power-On Configuration and
how to move inside the Setup.
Main Structure
Parall Interface
Serial Interface
Functions
Back to MFG? NO
Print out? NO
Print out? YES
Back to MFG? YES
Parallel Interface Settings
Serial Interface Settings
Functions Block
The functions concerning the interfaces group the parameters for the
configuration of the interfaces.
The setup item
Functions
groups the following printer functions:
• Paper overlay (9058 model only),
• Paper loading sequence,
• Buzzer setting,
• Quick cut sheet loading (9058 model only),
• Ribbon type,
• Barcode density
• Text printing direction,
• Graphics printing direction,
• Bar code printing direction,
• Paper path at power on,
• Language of the display messages.