User manual

Configuring the Printer
A78408098-005
51
Selection of the Tear-Off Mode
It is now possible to select the Tear-Off Mode.
1. Press the
PROGRAM
key when the printer is disabled or enabled without
printing to enter the Program Setup.
2. Press the ↓ key. The following message is displayed:
USER MACRO
3. Press the → key to select the macro for which you want to set the tear-off
mode
MACRO#1,MACRO#2,MACRO#3
or
MACRO#4
).
4. Press the ↓ key, until the following message is displayed:
TEAR NORMAL
Pressing the → or ← key it is now possible to decide how to execute the tear
off function:
TEAR NORMAL
Pressing the
ON LINE
key the paper is moved to the
tear-off position.
Pressing again the
ON LINE
key, the paper is moved
to the printing position.
If the
ON LINE
key is not pressed for 10 seconds, the
paper moves automatically back to the print
position.
TEAR AUTOMATIC
If the printer is not receiving data, the paper is
moved automatically to the tear position.
LABELS
The
ON LINE
key is disabled for the tear-off function.
This selection is useful when printing on labels.
TEAR NO
The Tear-Off function is disabled
5. Press the
PROGRAM
key to exit the setup.