Specifications

4-96
Guide to Printers and Printing
Collation The Optra C printer supports collation of multiple copies of
a print job internally. This feature is controlled by the –W
and –S flags of the qprt command.
–S !
collation off
–S +
collation on
–S +
number of copies
Note: This function is independent of the –N flag of the
qprt command. The –N# flag will cause the print job to
be sent to the printer # times. The –W# will send the print
job once, and # copies of the job will be printed.
Separator Pages The Optra C printer supports internally generated separator
pages. This feature is controlled by the –E flag of the qprt
command.
–E 0
None
–E 1
Between Copies
–E 2
Between Jobs
–E 3
Between Pages
The paper source defaults to Feeder. To change the
default, the uS attribute must be changed in the virtual
printer. The valid values for uS are the same as the paper
source flag.
Note: This function is independent of the –B flag of the
qprt command.