User manual

ESC L {n1} {n2} {p1}...{px}
Prints double density dot graphics at half speed (120
dpi).
1B 4C {n1} {n2} {p1}...{px}
27 76 {n1} {n2} {p1}...{px}
0 ≤ n1 ≤ 255
0 ≤ n2 ≤ 6
Terminator code. See ESC K description.
ESC Y {n1} {n2} {p1}...{px}
Prints double density dot graphics at normal speed
(120 virtual dpi).
1B 59 {n1} {n2} {p1} {p2}...{px}
27 42 {n1} {n2} {p1} {p2}...{px}
0 ≤ n1 ≤ 255
0 ≤ n2 ≤ 6
Terminator code. See ESC K description.
ESC Z {n1} {n2} {p1}...{px}
Prints quadruple density dot graphics (240 virtual
dpi).
1B 5A {n1} {n2} {p1} {p2}...{px}
27 90 {n1} {n2} {p1} {p2}...{px}
0 ≤ n1 ≤ 255
0 ≤ n2 ≤ 12
Terminator code. See ESC K description.
ESC * {m} {n1} {n2} {p1}...{px}
Sets dot graphics mode (EPSON LQ and IBM
Proprinter XL24 AGM modes).
1B 2A {m}{n1}{n2} {p1}...{px}
27 42 {m}{n1}{n2} {p1}...{px}
m=0,1,2,3,4,5,6,32,33,38,39,40
0 ≤ n1 ≤ 255
0 ≤ n2 ≤ 12
Terminator code. The following table shows you the available 8 needle dot
graphics modes (EPSON LQ mode):
Appendix A
A.22
A78401745-001